Quoizel HCE8409IB Hillcrest User Manual

Browse online or download User Manual for Lighting Quoizel HCE8409IB Hillcrest. Quoizel HCE8409IB Hillcrest User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1. Before beginning the installation, carefully unpack and identify all parts referring
to the illustration.
2 Turn the electrical power to installation point OFF at circuit breaker
3.
4.Install the bulb referring to fixture markings and/or labels for maximum wattage.
5.Lift the CAGE with GLASS PANELS upward to attach the bottom of the FIXTURE
HOOD and make the holes on the top edge of the CAGE match the mounting holes
on the bottom of the FIXTURE HOOD. Secure them together with the LOCK
SCREWS. Hand them until snug with screw driver.
6.
8. Refer to Page 2 for fixture caulking instructions.
9 Restore power to the installation point ON. Retain this sheet for future reference.
..
.
Slip down the GLASS PANELto the inside of the CAGE. Locate the TABS onto the
top edge of the GLASS PANELand match the holes on them with the mounting
holes on the top edge of the CAGE. Use screw driver, thread the LOCK SCREWS
into the mounting holes and hand tighten until snug to secure the GLASS PANEL.
Place the CROSSBAR on the BACKPLATE and align the holes in the BACKPLATE
with a set of threaded holes in the CROSSBAR. Install the (2) MOUNTING
SCREWS in the aligned threaded holes on the CROSSBAR. Next, mount the
CROSSBAR to the outlet box with (2)OUTLET BOX SCREWS (not provided).
6. Make the connections: Use wire connectors(not supplied) connect the HOUSE
GROUND to the FIXTURE GROUND WIRE attach the HOUSE WHITE WIRE to
FIXTURE WHITE (or RIBBED SIDE) SUPPLY WIRE; connect the HOUSE BLACK
(or RED) WIRE to the FIXTURE BLACK(or SMOOTH SIDE) WIRE. Wrap each
connection with approved electrical tape.
7. Carefully tuck all wires into the WALLMOUNTED OUTLET BOX and position the
fixture over the outlet box.Align the HOLES in the BACKPLATE with the
2 MOUNTING SCREWS attached to the UNIVERSAL CROSSBAR. Pass the
fixture over the 2 MOUNTING SCREWS and secure against by threading
2 MOUNTING BALLS onto end of screw. Tighten until snug.
()
()
()
;
INSTALLATION INSTRUCTIONS
IS HC8409
Page1of2
2007-02-28
-
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
FIXTURE SUPPLY WIRE
and GROUND WIRE
OUTLET BOX
(2) MOUNTING SCREWS
(2) OUTLET BOX SCREWS
(not supplied)
CROSSBAR
FIXTURE HOOD
GLASS PANEL
LOCK SCREW
CAGE
TAB
LOCK SCREW
SOCKET
(2)MOUNTING
BALLS
BACKPLATE
Page view 0
1 2

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

1. Before beginning the installation, carefully unpack and identify all parts referringto the illustration.2 Turn the electrical power to installation

Page 2 - CAULKING INSTRUCTIONS

EXTERIOR GRADECAULKOUTDOORFIXTURE BACKPLATEEXTERIOR WALL SURFACEWALL SURFACE MOUNTED OUTDOOR FIXTURECAULKING INSTRUCTIONSWith the OUTDOOR FIXTURE prop

Comments to this Manuals

No comments